|Material:304 Stainless Steel||Usage:Commercial Usage|
|Bele Width:2000mm||Item:Industrial Fruit Dehydrator|
|Transport Package:Wooden Box||Specification:20000*2200*2700|
The materials are uniformly distributed on the mesh belt by the material feeder. The mesh belt generally adopts 12-60 mesh stainless steel mesh and it is drawn by a transmission device and move inside the dryer . The dryer is composed of several sections. For each section, the hot air is circulated separately. Part of exhausted gas is exhausted by a special moisture exhaust blower. The waste gas is controlled by an adjustment valve. The hot air passes through the mesh-belt covered with bring water material away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the drying process will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the user's requirements. The number of section might be selected according to the production demands.
Adopt vibration motor, it is smooth in running and convenient in maintenance. The noise is low and the service life is long.
The state of fluidization is uniform and no dead gaps or broken phenomenon so to even dry, cool product.
It is good in adjustment and wide in the field of application. The thickness of raw material and the speed of raw material to be moved inside the machine and the change of vibration range can be steeples. The damage the surface of raw material is small. So it can be used for raw materials that are easily to be broken. If the granule is not normal, the effect of process can not be effected.
The structure is fully seal, it is effective to prevent from cross pollution of raw materials and the working environment is clean.
The mechanical and heat are high and its effective of energy saving, compared to ordinal dryer, 30-60% of energy is saved.
Copyright © 2017 - 2022Pasta Drinking Straws Extruder Manufacture All Rights Reserved